Acid and alkali chemical pump motor features: 1. Applicable to the following acid and alkali pump working conditions: Adaptable to a wide range of industries, such as metallurgy, electricity, paper, food, pharmaceutical, synthetic fiber and other industrial sectors for transporting corrosive or non-contaminating media; chemical liquids, waste liquid treatment, acid, industrial liquids and emergency, standby Or the purpose of filtration; printed circuit boards, semiconductors, electroplating, metal surface finishing, rinsing, water and wastewater treatment. 2. The motor efficiency is high, and the efficiency can reach the IE2 level of IEC 60034-30:2014 and the level 3 energy efficiency of GB 18613-2012. 3. The motor core adopts cold-rolled silicon steel sheet, F-class insulation, high heat resistance temperature, strong impact resistance and long service life of insulation. 4. The motor casing is made of cast iron, which has stable structure, low vibration, low noise, stable performance, safety and reliability.
Motor use conditions: The altitude does not exceed 1000m; (above 1000m altitude belongs to the plateau motor, can be customized) The maximum ambient temperature does not exceed 40 ° C; The minimum ambient temperature does not exceed 15 ° C; S1 work system; The power supply voltage fluctuation does not exceed ± 5% (10% for short time); the frequency fluctuation does not exceed ± 2%; Insulation class F; Protection level: IP54, IP55; Cooling method: IC411;