Y-H marine three-phase asynchronous motor Features: 1. Applicable to ships and fishing boats to drive various machinery, such as pumps, fans, separators, hydraulic machinery and other auxiliary equipment, with high efficiency and large starting torque, low noise, easy to use and so on. 2. The motor complies with the standards of IEC 60092-301 and IEC 60034-1, and also meets the product standards of GB/T 7060 and JB/T 5273-2014. 3. The motor is approved by CCS of the National Classification Society and meets the requirements of international classification societies such as ABS, LR, BV, GL, DNV and RINA. 4. Installation dimensions and power levels are in accordance with GB, DIN, and IEC standards. 5. The motor standard is the ejector line, which can be made to the left and right according to the customer's demand, and the junction box can be rotated 360 to facilitate different needs of the user. The motor outlet screw sleeve is made of stainless steel joint, which fully ensures the electrical safety of the motor. 6. The surface of the motor windings and metal parts are in accordance with the requirements of high temperature motors. After special varnishing and treatment, they have good moisture, mildew and salt spray resistance. 7. A drain hole is provided at the bottom of the motor base to facilitate the discharge of condensed water.
Motor use conditions: The altitude does not exceed 1000m; The maximum ambient temperature does not exceed 45 ° C; The minimum ambient temperature does not exceed 15 ° C; The relative humidity of the air is not more than 95%, and there is condensation; With the effects of salt spray, oil mist, mold and sea water; Tilt: ±30°, rocking: ±22.5°; Shock and vibration effects; S1 work system; The power supply voltage fluctuation does not exceed ± 5% (10% for short time); the frequency fluctuation does not exceed ± 2%; Insulation class F; Protection level: IP54, IP55; Cooling method: IC411; Installation methods are: IMB3, B5, B35, V1, B14, B34 and so on.
浙ICP备16008951号
